Filter by Category

RADICAL Pinball GX141

Bally RADICAL Pinball Machine

The following parts are also known to work in RADICAL Pinball GX141 .

Sort by:

Page size:

1 2 3 4 5 6 7 8 9 10

-C-clip for 3/8 in shaft - ball shooter rod

C-clip for 3/8 in shaft - ball shooter rod

C-Clip (C crimp fastener, retaining clip) for most ball shooter rods.

-Switch - DPST power AC on-off

Switch - DPST power AC on-off

Toggle switch double pole, single throw 277 V 15 A

-Lamp socket & #44 bulb with diode USE A-17807

Lamp socket & #44 bulb with diode USE A-17807

Lamp socket & #44 bulb with diode USE A-17807

-Acetate instruction/score card cover 3.25 x 6

Acetate instruction/score card cover 3.25 x 6

Acetate instruction/score card cover 3.25 x 6 inches

-Machine Screw 6-32 x 3/8" p-rwh

Machine Screw 6-32 x 3/8" p-rwh

Machine Screw 6-32 x 3/8 inch long phillips with round washer head.

-Rollover switch & bracket assembly

Rollover switch & bracket assembly

Rollover switch assembly. Includes bracket and sub miniature snap action...

-Pop bumper bracket & coil kit

Pop bumper bracket & coil kit

Coil and bracket assembly kit for use in jet bumpers

-Rubber grommet

Rubber grommet - 3/8 inch OD

-Coil stop - flipper Williams

Coil stop - flipper Williams

Flipper coil stop for 1987 Williams F-14 TOMCAT, SPACE STATION, FIRE!, BIG...

-Torx® wrench key T-20 tamper resistant

Torx® wrench key T-20 tamper resistant

Special tamper resistant long arm Torx® key for size T-20

-Diverter plunger and spring 2-1/16 inch

Diverter plunger and spring 2-1/16 inch

Diverter plunger and spring 2-1/16 inch

-Leaf switch - jet bumper SW11A-37

Leaf switch - jet bumper SW11A-37

Pop bumper Leaf switch assembly for most solid state pinball machines.

-Post stud #6 x 1-7/8 inch wood screw 02-4426-1

Post stud #6 x 1-7/8 inch wood screw 02-4426-1

Playfield stud with wood screw bottom and 6-32 machine thread top.

-Kicker arm slingshot assembly

Kicker arm slingshot assembly

Kicker arm slingshot assembly

-Sheet Metal Screw #4 x 1/2 inch pop bumper cap

Sheet Metal Screw #4 x 1/2 inch pop bumper cap

#4 x 1/2 inch long round-head sheet metal screw pop bumper cap

-Capacitor 0.01uf 50v +80-20 axial

Capacitor 0.01uf 50v +80-20 axial

Capacitor 0.01mf 50v +80-20 axial

-Invisiglass playfield 21 x 43 x 3/16 inch standard

Invisiglass playfield 21 x 43 x 3/16 inch standard

Standard pinball playfield Invisiglass.

-Coil sleeve - 2-1/16"

Coil sleeve - 2-1/16"

Nylon coil sleeve - 2-1/16 inch

-anyPin NVRAM Battery Eliminator

anyPin NVRAM Battery Eliminator

NVRAM replacement for 6116, 6264 RAM ICs

-Plunger & crank assembly WPC early right

Plunger & crank assembly WPC early right

Williams right side flipper crank, plunger and link assembly for early flippers

-Post stud 8-32 x 2 inches 5/16 drive

Post stud 8-32 x 2 inches 5/16 drive

Steel-zinc stud with #8-32 thread on top and #8-32 thread on bottom

-Plunger & crank assembly WPC early left

Plunger & crank assembly WPC early left

Williams left side flipper crank, plunger and link assembly

-Spinner Decal Prism Foil set (2)

Spinner Decal Prism Foil set (2)

1 X 1-1/8 inches front and rear spinner peel & stick vinyl prism foil used on...

-Bracket - coil front

Bracket - coil front

Coil support bracket.

-Machine Screw 6-32 x 2-1/2" p-rwh

Machine Screw 6-32 x 2-1/2" p-rwh

Machine Screw 6-32 x 2-1/2" long phillips with round washer head.

-Bracket - playfield holder

Bracket - playfield holder

Bracket - playfield holder

-Power supply Williams System 11B/C

Power supply Williams System 11B/C

Power supply Bally/Williams System 11B/C

-Machine Screw 2-56 x 7/16 inch p-ph-s

Machine Screw 2-56 x 7/16 inch p-ph-s

Small phillips pan-head screw used to secure most playfield switches.

-Bracket - Coil Retaining mounting

Bracket - Coil Retaining mounting

USE 535-5203-03

For Reference

-Roll pin 1/8" x 7/16" 20A-8716-5

Roll pin 1/8" x 7/16" 20A-8716-5

1/8" diameter x 7/16" length slotted spring roll pin. Reference:...

-PAL nut 5/8 inch

PAL nut 5/8 inch

PAL nut 5/8 inch. Replaces 02-3000 & 240-5003-01

-Snap-in standoff #6 x .541 inch black

Snap-in standoff #6 x .541 inch black

Black plastic spacer #6 x 0.541 inch tall

-Chime plunger Williams 2-1/2"

Chime plunger Williams 2-1/2"

Williams coil plunger for electromechanical chimes. Total length 2-1/2"...

-Relay - 6 volt cube style

Relay - 6 volt cube style

relay 4PDT 6VDC 5A VS. Replaces Williams 5A-8994

-Switch sub-mini assembly

Switch sub-mini assembly

Sub miniature snap action switch with 3 terminals and custom wireform.

-Cap screw 10-32 x 3/8

Cap screw 10-32 x 3/8

Black 10-32 X 3/8 hex socket head cap screw...

-IC - 14 pin DIP 55536 CVSD

IC - 14 pin DIP 55536 CVSD

IC - 14 pin DIP 55536 CVSD 5370-09691-00

-Twin nut plate - Tinnerman switch stack

Twin nut plate - Tinnerman switch stack

Twin nut 2 hole spring steel switch stack retainer

-Rivet - 1/8 sft D x 3/16 sft L x 7/32 Head A

Rivet - 1/8 sft D x 3/16 sft L x 7/32 Head A

Steel zinc plated semi-tubular rivet with 7/32 inch oval head

-Leaf switch - kicker

Leaf switch - kicker

Switch - kicker.

-Crimp terminal .062 inch male

Crimp terminal .062 inch male

Crimp terminal .062 inch male

-Nut 10-32 esn nylock 238-1306-00

Nut 10-32 esn nylock 238-1306-00

Nut with 10-32 thread and elastic stop top (esn) 238-1306-00

-Bracket - Coil mounting

Bracket - Coil mounting

Bracket - coil mounting

-Speaker 4" - 8 ohm piezo 50 watts

Speaker 4" - 8 ohm piezo 50 watts

4" speaker - 8 ohms piezo 50 watts. Reference: 5555-12068-00

-Spring - extension

Spring - extension

Spring - extension

-Plunger - coil

-Sheet Metal Screw #6 x 1/2 inch p-trh

Sheet Metal Screw #6 x 1/2 inch p-trh

#6 Truss head zinc plated machine screw 1/2 inch long.

-Bolt carriage 1/4-20 x 1-1/4 inch; black

Bolt carriage 1/4-20 x 1-1/4 inch; black

#4320-01123-20B

Bolt is 1/4-20 thread x 1-1/4" long and used in machines such as: BUGS...

-Bracket - back box toggle latch

Bracket - back box toggle latch

Latch plated used with tension latch 20-9347 to secure backbox.

-AC Power Cord - 10' AC - stripped end

AC Power Cord - 10' AC - stripped end

For Reference

-Tape double sided .032 x 3/4 inch x 9 ft

Tape double sided .032 x 3/4 inch x 9 ft

Tape double sided .032 x 3/4 inch x 9 ft

-Nut 6-32 hex

6-32 nut used on Williams flipper plates to secure flipper bushings.

-Machine Screw 6-32 x 3/8" p-ph

Machine Screw 6-32 x 3/8" p-ph

Machine screw with 6-32 thread and 3/8 inch long with phillips pan head.

-Spring - extension

Spring - extension

Extension spring. Reference: 10-362

-Cable clamp 1 inch diameter single

Cable clamp 1 inch diameter single

Cable clamp 1 inch diameter single

-Coil stop - Williams/Bally

Coil stop - Williams/Bally

Williams/Bally coil stop assembly with 3/8" centerline mounting holes.

-Standoff - DMD display mount 5/8 inch

Standoff - DMD display mount 5/8 inch

Standoff - DMD display mount 5/8 inch

-Coil - solenoid

Coil - solenoid

Common solenoid coil used on many manufacturers pinball machines.

-Flipper rebuild kit Williams 1 Left 2 Right

Flipper rebuild kit Williams 1 Left 2 Right

Williams pinball machine flipper rebuild kit includes...

-Drop target - Williams black flat 03-8036

Drop target - Williams black flat 03-8036

Williams black drop target flat. Same as #03-8036

1 2 3 4 5 6 7 8 9 10