Filter by Category

RADICAL Pinball GX141

Bally RADICAL Pinball Machine

The following parts are also known to work in RADICAL Pinball GX141 .

Sort by:

Page size:

1 2 3 4 5 6 7 8 9 10

-Rubber bumper grommet - apron

Rubber bumper grommet - apron

Playfield glass protector black rubber grommet used on aprons

-Lamp socket - twist wedge large for #906

Lamp socket - twist wedge large for #906

Large twist-in socket for #906 wedge base lamps.

-Plunger assembly 3.385 inches

Plunger assembly 3.385 inches

Bell armature or plunger assembly for ball kickers and poppers

-Pin-Buddy™ Game Saver Cantraption™ 45°

Pin-Buddy™ Game Saver Cantraption™ 45°

Pin-Buddy™ Game Saver Cantraption&tm 45°

-Trim side channel - 27 inch translite top

Trim side channel - 27 inch translite top

Williams/Bally backglass trim. For games that use translites.

-Machine Screw 6-32 x 1/4 inch p-ph-sems

Machine Screw 6-32 x 1/4 inch p-ph-sems

Machine screw 6-32 thread x 1/4 inch long with phillips head and external tooth lock washer

-AC Power Cord - 15 foot stripped end

AC Power Cord - 15 foot stripped end

AC Power Cord - 15 foot stripped end

-Nut 6-32 esn stop nut

Nut 6-32 esn stop nut

Elastic Stop Nut used on rod and ring (A-4754) assemblies.

-Rail side playfield plastic trim 42-1/4

Rail side playfield plastic trim 42-1/4

Playfield side rail plastic molding is 42-1/4"

-Shooter spring blue .038 inch High tension

Shooter spring blue .038 inch High tension

High tension spring used on pinball machine ball shooter assemblies. .038 inch

-Knocker assembly kit Williams/Bally

Knocker assembly kit Williams/Bally

Knocker assembly kit for Bally and Williams AE-23-800

-Pop bumper bracket 04-10888

Pop bumper bracket 04-10888

Pop bumper bracket used on Williams / Bally machines and other brands.

-Heat Sink Compound - 6.5 gram tube

Heat Sink Compound - 6.5 gram tube

White silicone heat sink compund in 6.5 gram tube for power transistor and...

-Glass corner protectors - Set of 2

Glass corner protectors - Set of 2

Glass corner protectors - Set of 2

-Washer .390 x .625 x .059 inch shooter

Washer .390 x .625 x .059 inch shooter

Flat washer used in ball shoooter assemblies .390 x .625 x .059 inch.

-Opto board drop target 3 bank

Opto board drop target 3 bank

New 3 bank Universal Drop Target Opto board is a one-size-fits-all, plug and play replacement.

-E-clip for 3/8 inch shaft - ball shooter rod

E-clip for 3/8 inch shaft - ball shooter rod

Fits shaft diameter of 3/8 inch with groove diameter of 5/16 inch.

-Opto sensor IR LED

Opto sensor IR LED

Williams drop target opto transceiver

-Ball shooter lane feeder assembly Williams

Ball shooter lane feeder assembly Williams

Ball shooter lane feeder assembly Williams

-E-clip for 1/4 in shaft 20A-8712-25

E-clip for 1/4 in shaft 20A-8712-25

E-clip or e-ring commonly used on many mechanisms. 20A-8712-25 270-5002-00

-Plumb bob - casting

Plumb bob - casting

Common tilt plumb bob with 0.15 inch interior diameter for rod.

-Latch - toggle back box

Latch - toggle back box

Back box toggle latch 20-9347 or tension latch

-Backglass trim kit - Williams WPC/System 11

Backglass trim kit - Williams WPC/System 11

Backglass trim kit - Williams WPC/System 11

-PINSCORE Display System Williams 11B & C

PINSCORE Display System Williams 11B & C

PS-12502-P Rev C display system for Williams system 11B and 11C

-Coil - solenoid no diode

Coil - solenoid no diode

Common solenoid coil used on many manufacturers pinball machines.

-Post stud 8-32 x 2-1/16 inches 6-32 top

Post stud 8-32 x 2-1/16 inches 6-32 top

Playfield post fastener 6-32 top thread 1/4" long 8-32 bottom thread 3/8 inch

-Spring - flipper return tapered

Spring - flipper return tapered

Common tapered style compression flipper return spring

-Switch miniature 1-3/4 inch lever with hook

Switch miniature 1-3/4 inch lever with hook

Miniature microswitch switch with 1-3/4" flat actuator.

-Machine Screw 6-32 x 3/8" p-ph-sems

Machine Screw 6-32 x 3/8" p-ph-sems

Machine Screw 6-32 x 3/8" long phillips pan head with external tooth lockw...

-Coil stop - flipper Williams - early

Coil stop - flipper Williams - early

Williams/Bally flipper coil stop. Reference:A-12111

-Outhole runway ball guide with baffle

Outhole runway ball guide with baffle

Metal outhole runway trough ball guide with baffle.

-Ball shooter housing - chrome

Ball shooter housing - chrome

Ball Shooter Housing - Chrome. Reference: 21-6645-1

-Ground braid 1/4 in wide - per foot

Ground braid 1/4 in wide - per foot

Wire 1/4" ground braid

-Flipper & shaft - ridges yellow

Flipper & shaft - ridges yellow

Flipper & shaft segmented ridges yellow

-Switch mini w/flat blade 1.05"

Switch mini w/flat blade 1.05"

Miniature switch with flat actuator lever.

-T-Nut 6-32 thread 1/4 inch barrel 1/2 inch 3 prong

T-Nut 6-32 thread 1/4 inch barrel 1/2 inch 3 prong

6-32 thread tee nut with 1/4 inch barrel height, 3-prong, 19/32 inch base

-Cap with neck - ball popper

Cap with neck - ball popper

Cap for vertical upkicker (VUK) ball popper assembly sits on top of A-11336 plunger...

-Spring - compression jet bumper

Spring - compression jet bumper

Compression spring used on pop bumper assemblies and others.

-Switch - sub-miniature 4" wire lever

Switch - sub-miniature 4" wire lever

Universal snap action submicroswitch with 4 inch wire actuator that can be formed to various shapes.

-Nut 8-32 esn stop nut

Nut 8-32 esn stop nut

Elastic stop nut used on the thumper bumper brackets and other mechanisms.

-Connector - IDC green 12 position

Connector - IDC green 12 position

.156" spacing 12 position Insulation Displacement style connector

-Bumper post 8-32 bottom stud 6-32 tap

Bumper post 8-32 bottom stud 6-32 tap

Metal post 8-32 bottom stud

-Slingshot arm

Slingshot crank arm assembly

-Plunger - pop bumper

Plunger - pop bumper

Williams/Bally pop bumper plunger. Reference: 02-3406-1 2A-340...

-Spring - extension diverter plunger

Spring - extension diverter plunger

Spring - extension diverter plunger

-Connector - IDC red 9 position 9R MT/END 22/156

Connector - IDC red 9 position 9R MT/END 22/156

9 position Insulation Displacement Connector (IDC) 22 ga 9R MT/END 22/156

-Mini-post 8-32 thread

Mini-post 8-32 thread

Mini post 8-32 thread Reference: 02-4003

-Spacer spool #8

Spacer spool #8

Spacer spool used on Williams/Bally pinball machines.

-Striker ring - outhole kicker arm

Striker ring - outhole kicker arm

Red plastic sleeve used to cushion outhole kicker arm. Reference:...

-Circuit board standoff w/ adhesive back

Circuit board standoff w/ adhesive back

Peel & stick adhesive backed standoff is used to mount glass displays.

-Lock and cam - 7/8" combination

Lock and cam - 7/8" combination

Standard 7/8" long chrome finish barrel lock with 3 digit adjustable combination

-E-clip for 3/16" shaft 20A-8712-18

E-clip for 3/16" shaft 20A-8712-18

E-clip or e-ring commonly used on many 3/16" mechanism shafts

-IC - 24 pin DIP Static RAM 6116LP XO-928

IC - 24 pin DIP Static RAM 6116LP XO-928

Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00

-IC - 28 pin DIP NVRAM FM1608-120

IC - 28 pin DIP NVRAM FM1608-120

IC - 28 pin DIP NVRAM FM1608-120

-Relay board assy general illumination

Relay board assy general illumination

Williams System 11 pinball machine 24 volt solenoid and General Illumination

-WPC bracket backbox mounting hinge set

WPC bracket backbox mounting hinge set

Left and right side black metal hinge bracket for Bally / Williams WPC games.

-Outhole kicker plate mounting

Outhole kicker plate mounting

Outhole kicker plate mounting

-Foam rubber protector 3/4" wide x 20" long x 1/4" thick

Foam rubber protector 3/4" wide x 20" long x 1/4" thick

20 inch long foam rubber protector for standard size front trim lockbar

-Z coil bracket B-7572-1

Z coil bracket B-7572-1

Coil bracket for pinball machine kicker and slingshot assemblies

-Pin-Buddy™ Game Saver Cantraption™ 180°

Pin-Buddy™ Game Saver Cantraption™ 180°

Pin-Buddy™ Game Saver Cantraption™ 180°

1 2 3 4 5 6 7 8 9 10