Filter by Category

GODZILLA Pinball (SEGA) GX1044

Pinball Machine

The following parts are also known to work in GODZILLA Pinball (SEGA) GX1044 .

Sort by:

Page size:

1 2 3 4 5 6 7 8 9 10 ...

-Motor - 24 vac 60 rpm

Motor - 24 vac 60 rpm

Motor 24 VAC 60 RPM

-Spiral Pin 5/32" x 3/8" roll pin

Spiral Pin 5/32" x 3/8" roll pin

Spring pin. Reference: 251-5015-02

-GODZILLA (Sega) Card Instruction

GODZILLA (Sega) Card Instruction

Instruction card for Sega GODZILLA on glossy card stock.

-GODZILLA (Sega) Manual

GODZILLA (Sega) Manual

Manual and schematic set for Sega GODZILLA pinball machine.

-Hex spacer 1/4 x 3/8 inches #6-32 tap

Hex spacer 1/4 x 3/8 inches #6-32 tap

Hex spacer Post 3/8 x 1/4 inches #6-32 tap both ends.

-Ribbon Cable - 26 pin 80 inch U USE 036-5001-81

Ribbon Cable - 26 pin 80 inch U USE 036-5001-81

Ribbon Cable - 26 pin 80 inch - U

-Switch - sub micro 0.1 Amp 125 AC

Switch - sub micro 0.1 Amp 125 AC

Switch with wireform. Reference: 180-5100-01 Replaces 180-5100-02.

-Hex spacer 1/4 x 7/8 inches f-f #6-32 taps

Hex spacer 1/4 x 7/8 inches f-f #6-32 taps

1/4 inch hex spacer post femal/female 6-32 thread 7/8 inches long.

-Switch - sub micro 0.1 Amp 125 AC

Switch - sub micro 0.1 Amp 125 AC

Sub mini microswitch with wireform Data East

-Spacer - 1/4" self locking

Spacer - 1/4" self locking

Spacer - 1/4" self locking

-Wire guide rail 2.25 inch

Wire guide rail 2.25 inch

Wire guide rail 2.25 inch

-GODZILLA (Sega) Manual

GODZILLA (Sega) Manual

Manual and schematic set for Sega GODZILLA pinball machine. Reference...

1 2 3 4 5 6 7 8 9 10 ...