Williams / Bally Fliptronic Flipper opto board is located inside cabinet at the flipper buttons. Used in many late model pinball machines including: ATTACK FROM MARS CACTUS CANYON CHAMPION PUB CI 

Used in: AFM, CC, CP, Congo, JY, MB, MM, NBA, NGG, SC, SS, TotAN 

34 pin 3-3/4" long 2 connector ribbon cable used for CPU to Driver Board connections in Williams/Bally WPC system games. Used in: ATTACK FROM MARS BLACK ROSE BRAM STOKER'S DRACULA THE MACHINE B 

This is our most popular dot matrix display Plug and play complete module replacement for Williams, Sega, Data East, Bally, Gottlieb, new Stern, Alvin G and Capcom pinball machines. Also used on many 

Application Specific Integrated Circuit (ASIC) for Williams/Bally WPC CPU #A-12742 board and WPC001 replacement CPU board.  

 

Common 6" speaker used in cabinet bottoms of Williams/ Bally games. 4 ohm 25 watt Used in WPC system(1990's) games.  

Newly re-designed opto receiver for late model Williams/Bally WPC-S, WPC-95, and Pinball 2000 pinball machines replaces part numbers A-18618, A-18618-1, and PCB# 5768-14122-01. This new board has a 

15" long 34 pin 2 connector Display Data & Control ribbon cable with connectors for Williams/Bally WPC games. 

.156" spacing 12 position Insulation Displacement style connector. Instead of this connector, we recommend an upgrade to crimp style terminals and 12 position housing for better electrical connecti 

Ground braid cable assembly with terminals - 45" long. Reference: A-9818-5 

Capacitor 470 pf @ 100v axial measures .1" diameter x .1" wdie x .2" length.  

This is the new style, black plastic, 3 AA cell, circuit board mounted battery holder for use on late model Williams pinball machine CPU boards. This is Williams part #A-15814. Note: Solder term 

Late model 4-ball transmitter board for Bally/Williams pinball machines. Replaces A-18617 or A-18617-1. Used on the following Williams/Bally machines: Bally ATTACK FROM MARS Bally CACTUS CA 

26 pin 14" long ribbon cable used in: CACTUS CANYON CHAMPION PUB CIRQUS VOLTAIRE JUNKYARD MONSTER BASH MEDIEVAL MADNESS NBA FASTBREAK NO GOOD GOFERS SCARED STIFF 

13r mt/end 18/156 

Coin door interface board with spacers for Williams WPC system pinball machines. 

4 lamp pcb assembly. Reference: A-21740 

Technician's power cord. 12" long. Has IEC 3-prong male to NEMA 5-15R female 120 Volt plug. Used inside of Bally/Williams pinball machine cabinets. Allows techincian to plug in light or tools while 

9r mt/end 18/156