NEW!- 2 for $99 Special! Standard pinball cabinet tempered PLAYFIELD GLASS measures 21" x 43" x 3/16" thick and is used on most manufacturers pinball machines. SHIPPING NOTE: NO international  

Plastics Protectors are the best insurance against playfield damage. The laser cut clear polycarbonate plastic set protects valuable artwork and mechanisms from repeated ball impact damage. This s 

Williams transformer 115/230 volts 50/60 Hz with connectors.Reference: 5610-12136-00 A-13770  

This is the replacement white plastic beacon dome topper used on: Williams F-14 TOMCAT  

3 terminal, dual winding flipper coil is used on the following games: F-14 TOMCAT (FL-11630 lower flippers)(FL-11722 used on uppers) FIRE! BIG GUNS (FL-11630 lower flippers)(FL-11753 used on uppe 

2 piece set (left and right side) of 45 1/2" X 3" stainless steel side rail cabinet trim for Williams BANZAI RUN This set includes the holes necessary for flipper pushbuttons. Does not fit Williams  

Plastic cube style, circuit board mounted DPDT (double pole, double throw) 24 volt relay used in many games such as: Williams TAXI Bally BUGS BUNNY Bally DR DUDE Williams RIVERBOAT GAMBLER Bally  

This is the drive belt used on rotating beacon assemblies #C-11604 as used in Williams F-14 TOMCAT (requires 2 belts). Reference: 20-9543 C-11604 Rotating Beacons assembly 14-7946 motor 03-80 

Williams / Bally stainless steel lockdown bar front trim used on all late model standard body size Williams pinball machines and most Bally standard size (post 1988) games. Does not fit Williams CYCLO 

AS LOW AS .65 ! This is the STANDARD carbon steel 1-1/16" diameter, 80 gram pinball used on all contemporary pinball machines. It has a beautiful mirror-like finish and meets or exceeds factory 

Standard 28-1/2" ribbed pinball machine leg with chrome finish for Williams / Bally and other games. Williams part ref. #A-19514 Williams part ref. #01-2263-2 Chicago Coin Machine #291-2501-A  

Ten-bulb box of #89 High quality Eiko lamp. Commonly used as flash lamps on and under playfields and in backboxes. Specs: Volts: 13 Amps: .58 amps Base: Med. Bayonet Reference: Williams part #24- 

New production flash lamp resistor board is used under the playfield board for: Williams PINBOT (uses 4 boards) Williams MILLIONAIRE (uses 4 boards) Williams ROAD KINGS (uses 3 boards) and F-14 

NEW! PINSCORE Display Systems! Brilliant design makes brilliant displays. New PINSCORE LED displays for pinball machines are the best performing, most feature-packed and economical replacement syst 

NEW! PINSCORE Display Systems! Brilliant design makes brilliant displays. New PINSCORE LED (Light Emitting Diode) displays for pinball machines are the best performing, most feature-packed and econ 

New, high quality chrome finish 3/8-16 thread with 5/8" acorn head pinball leg bolts. 2-7/16" measured under the head. Reference part #s: Replacement for Gottlieb A-3775 Replacement for Gottlie 

Williams plunger and link assembly with 2-1/8" long plunger. Used in B-12283 Kicker Arm assembly. Reference: A-8050-1 plunger and link assembly B-12283 kicker arm assembly 02-3704-2 

3 bank push button Service / Diagnostic switch assembly with center latching switch for early solid state pinball machines. Reference: 5641-09369-00 27-1008 

White 3" flipper bat with Williams "W" molded on shaft assembly. 2-3/16" (55mm) steel shaft.Reference;20-9250-5 Reference: 20-9250-5. May subsititute for 20-10110-5. 

Ball gate wire form for Williams F-14 TOMCAT right side shooter lane ball gate assembly A-11387. Reference: 12-6731 A-11387