Coil with diode is equivalent to Midway part #A360-00210-0000. Reference: CN-31-2000 

Bally EIGHT BALL DELUXE pinball machine lower playfield apron peel & stick vinyl transfer art. This differs from the complete vinyl decal as it is the line art and images supplied on masking tape to 

Screened plastic Price Plate with coin chute opening for early Bally pinball machine coin doors.  

Pop bumper cap decal with artwork for Bally EIGHT BALL DELUXE pinball machine. DECAL ONLY. Reference: 03-8277-12 cap C-1018-3 ring Midway #A967-00033-0000 

NEW! From the makers of the ULTIMATE Bally/Stern MPU board and ULTIMATE Bally/Stern Solenoid Driver board comes the ULTIMATE Lamp Driver board. Plug and play. All important signals now have test po 

Equivalent to: Midway #A360-00208-0000 

Large core coil with three terminals and 2 diodes. 

Bally shooter lane arch bracket is made from pre-polished stainless steel for long life shine. Reference: P-1732 hood plate  

This is the most commonly used pop bumper skirt, or wafer, used in all manufacturers' pop bumper assemblies. Equivalent to: Williams #03-6035-5 Stern / Sega / Data East #545-5098-00 Stern /  

Stainless steel bottom glass retainer lift trim for 1970's through 1980's pinball machines from Bally, Stern, GamePlan, Williams and other games with 1/8" thick backglasses.Measures 28-1/2" 

Common pop bumper and slingshot coil. Equivalent to: Bally Midway A360-00044-0000    

Equivalent to: Midway #A360-00211-0000 

1/2" wide x 1-1/2" inner diameter standard red flipper rubber fits most flippers.Reference Numbers: Bally #R-406-3, #R-533-3, #23-6519-4 Midway #0017-00041-0682 Early Stern #7A-12 

PinScore Premium Pinball LED Displays New PinScore™ Display systems for pinball machines and shuffle alleys are efficient, economical and easy to install. Brilliant design makes old high-v 

PinScore Premium Pinball LED Displays New PinScore™ Display systems for pinball machines and shuffle alleys are efficient, economical and easy to install. Brilliant design makes old high-v 

This is the plastic, 3 clip, thumper bumper body used on mid 80's Bally pinball machines such as: EIGHT BALL DELUXE CENTAUR MR & MRS PAC MAN as well as later model Williams/Bally machines. R 

White silicone heat sink compund in 6.5 gram tube for power transistor and bridge rectifier installation. Reference: Bally M-1834 

Flipper End Of Stroke (EOS) switch. Used in Bally/Midway linear flipper assembly A360-00267-0000 and AE94-00060-0000. Reference: Bally ASW-A20-34 Bally ASE-982-1295 Break switch Midway A365 

High voltage power supply fuse used on early solid state Bally solenoid driver boards. Fast blow glass tube 3/16 amp (0.187 amp) AGX or 8AG style 250 volt (6.3x25mm) - Box of 5. Reference: Bal 

Metal yoke fits all pop bumper ring and rod assemblies. Use in conjunction with fiber yoke 01-5193. Reference: Williams 01-5492 Williams 1A-5492 Bally P-3656-1 Bally P-3656-5