NEW!- 2 for $99 Special! Standard pinball cabinet tempered PLAYFIELD GLASS measures 21" x 43" x 3/16" thick and is used on most manufacturers pinball machines. SHIPPING NOTE: NO international  

Bally ADDAMS FAMILY pinball machine bookcase motor assembly with small crank arm. Reference: A-15474 Bookcase motor and crank 14-7969 Bookcase motor 03-8619 Bookcase 1-1/2" white crank  

 

 

Bally ADDAMS FAMILY diverter drive assembly. Includes bracket, plunger and spring, coil stop and coil. Reference: A-15040 assembly A-15041 steel bracket 01-8413 coil mounting bracket AE-26-1500 c 

 

3 terminal, dual winding flipper coil is used on the following games: F-14 TOMCAT (FL-11630 lower flippers)(FL-11722 used on uppers) FIRE! BIG GUNS (FL-11630 lower flippers)(FL-11753 used on uppe 

Williams FUNHOUSE ball release assembly. Includes AE-27-1200 coil plunger, spring, and bracket. Reference: A-8039-3 A-8335 plunger 03-7176 striker ring 

Williams/Bally left side flipper mounting plate with staked bracket for EOS (end-of-stroke) switch. Reference: A-23001-L-2 flipper assembly A-23001-R-2 flipper assembly B-13104-L flipper bra 

Williams / Bally Fliptronic Flipper opto board is located inside cabinet at the flipper buttons. Used in many late model pinball machines including: ATTACK FROM MARS CACTUS CANYON CHAMPION PUB CI 

This is the clear tempered 27" x 18-7/8" x 1/8" thick glass that supports and protects the translite plastic backglass art on many 1990 and later Williams / Bally pinball machine. Reference: 08-74 

Cashbox retainer bracket for Williams / Bally late model machines. Reference: 01-6389-1  

Coil and bracket assembly. A component of A-12665 kicker arm/slingshot asssembly. Reference: A-14369-L B-7572-1 bracket and stop assembly AE-27-1200 coil 01-8-508-S coil retaining bracket  

 

Universal Ball Shooter rod with black plastic knob. Used on all Williams / Bally and other brand ball shooter assemblies. The steel shaft portion of the rod measures 7-7/8" long. 

Plunger Reference: 02-4241 

 

Slingshot crank arm assembly used in late model Bally/Williams pinball machines. Reference: A-12664  

30" long 14 pin 2 connector Data & Control ribbon cable with Display to Dot Matrix controller connectors for Data East / Sega / Stern and Williams/Bally WPC games. Reference: 036-5260-30 5795 

Rear black plastic playfield glass trim molding - 20-38/" wide.