⚠ CALIFORNIA WARNING:
This product can expose you to chemicals, including lead and DEHP, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to https://www.p65warnings.ca.gov.
3 terminal, dual winding flipper coil with 1N4004 diodes used on Williams / Bally games as well as Jersey Jack Pinball and Chicago Gaming.
FL-11629 high flipper strength, parallel wound coil, used on many Williams WPC system pinball games (original blue coil wrapper)
Specs:
Primary winding (power) ~4 ohms (no diode)
Secondary winding (hold) ~132 ohms (no diode)
Williams / Bally pinball machines flippers are designed for a balance of power based on the layout of a given game. Always use the specified coil number for your machine. Always install a flipper rebuild kit before changing coils (see related items below). The factory recommends a complete flipper rebuild every 500,000 cycles or flips. But, if you must adjust flipper strength, here is a list of coil numbers and their relative strength going from weakest to strongest:
FL-11753 Yellow - Used with short flippers and close shots
FL-11722 Green - Used for close shots near drop targets
FL-11630 Red - The standard, most commonly used coil
FL-15411 Orange - Used for long playfield shots
FL-11629 Blue - Used for long shots and high ramps
All coils include new nylon sleeves (coil tubing) where applicable.
