Bally CREATURE FROM THE BLACK LAGOON Parts
The following parts are known to work in Bally CREATURE FROM THE BLACK LAGOON.
-
Cable clamp 1 inch diameter single
Cable clamp 1 inch diameter single
In Stock$0.59 -
Triac driver board - WPC
Williams/Bally pinball machine WPC System (Fliptronic) Triac driver board...
In Stock$69.99 -
Spring - extension
Extension spring. Reference: 10-362
In Stock$0.59 -
Machine Screw 2-56 x 1/2 inch p-ph-s
This is the small phillips panhead screw used to secure most playfield mic...
In Stock$0.39 -
Machine Screw 10-32 x 5/8" p-ph-s
Machine Screw 10-32 x 5/8" p-ph-s
In Stock$0.29 -
Speaker 3 inch - 4 ohm tweeter 15 watts
3 inch tweeter speaker used in backboxes of various pinball machines.
In Stock$34.99 -
Coil - relay no diode
Relay coil without diode
In Stock$22.99 -
Coil stop - Williams/Bally
Williams/Bally coil stop assembly with 3/8" centerline mounting holes.
In Stock$7.49 -
Leg - 28-1/2" Black with silver vein
Beautiful silver and black hammer tone leg fits Williams/Bally and other b...
For Reference -
MPU board Williams WPC 89
WPC89 System MPU board
In Stock$249.99 -
Nut 6-32 wing - plumb bob wire
Wing nut with 6-32 thread for plumb bob tilt assembly wire.
In Stock$0.19 -
Lane guide - 1-3/4 inch orange transparent
Williams / Bally style lane guide (also referred to as Rollover Guides.
In Stock$2.49