Williams RIVERBOAT GAMBLER Parts
The following parts are known to work in Williams RIVERBOAT GAMBLER.
-
Washer 0.125 x 0.281 x .032 inch
Washer - zinc plated- 0.125 x .281 x .032 inch rivet back
In Stock$0.59 -
Pin crank
Pin crank for ramp lifting mechanism.
In Stock$5.99 -
Pop bumper skirt - clear
Pop bumper skirt - clear
In Stock$1.49 -
E-clip for 5/16" shaft
E-clip or e-ring commonly used on many mechanisms. 5/16" measured at the o...
In Stock$0.39 -
Sheet Metal Screw #6 x 1" pl-hwh
The most common sheet metal / wood screw in late model pinball machines. T...
In Stock$0.19 -
Nut 8-32 keps
Nut 8-32 keps
In Stock$0.29 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
Tubing-clear 1-1/2"
Tubing - clear 1-1/2" Reference: 23-6716-2
In Stock$0.49 -
Washer 0.265 inch x 0.500 inch x 0.032 inch
Flat washer 0.265 inch x 0.500 inch x 0.032 inch
In Stock$0.19 -
Foam rubber strip 3/4 wide x 1/4 thick per inch
Foam rubber strip 3/4 wide x 1/4 thick per inch - black
In Stock$0.29 -
Bracket - speaker panel latch
Bracket - speaker panel latch
In Stock$7.49 -
Connector 2 position .062 inch terminals
2 position receptacle with no mounting ears uses .062 inch crimp terminals.
In Stock$0.29