Bally SPACE INVADERS Parts
The following parts are known to work in Bally SPACE INVADERS.
-
Connector .100 inch 28 position female
.100 inch 28 Position female molex housing.
For Reference -
Flipper pushbutton red
Flipper cabinet opaque red pushbutton used on many early solid state and EM games.
In Stock$3.49 -
C-clip for 3/8 in shaft - ball shooter rod
C-Clip (C crimp fastener, retaining clip) for most ball shooter rods.
In Stock$0.29 -
Guard - shooter lane Bally
Guard - shooter lane Bally
In Stock$6.99 -
Ball shooter T bushing Bally/Midway
Nylon T shaped bearing used on early Bally/Midway ball shooter assemblies.
In Stock$5.99 -
Aux lamp driver board A9
New production Auxiliary lamp driver board used in chaser light circuits f...
In Stock$94.99 -
Coin drop plate Bally 25¢
Coin door drop plate for 60's, 70's and 80's Bally coin door entry casting...
In Stock$3.99 -
Diode - 100 volt 0.15a XO-261
Diode small signal switching 100V 0.3A 2-Pin DO-35
In Stock$0.39 -
Credit lamp lens Bally/Williams
Playfield apron credit lamp plastic lens
In Stock$1.99 -
Pin-Buddy™ Game Saver Cantraption™ 180°
Pin-Buddy™ Game Saver Cantraption™ 180°
In Stock$19.99 -
Button - flipper housing red
Flipper cabinet opaque red pushbutton housing used on many early solid sta...
In Stock$3.49 -
Capacitor Kit - Bally AS-2518-56 Sounds+
5 piece electrolytic capacitor set for Bally AS-2518-56 Sounds Plus board
In Stock$9.99 -
Hole guard - switch slot 1-1/4 inch USE HG-SS125C
Hole guard - switch slot 1-1/4 inch
In Stock$21.99 -
Rectifier board Bally/Stern solderless
SOLDERLESS Rectifier board Bally/Stern AS-2518-18/49 TA-100 C-464
In Stock$104.99 -
Flipper caps L & R raised blue letter
White 2 inch left & right flipper cap set w/ raised blue ink lettering
In Stock$14.99 -
Plunger & link assy - Slingshot kicker
Bally plunger and link used in slingshot kickers and ball kicker assyembly Sub A-3714-3.
For Reference -
Button - flipper housing white
Flipper cabinet white pushbutton housing
In Stock$2.99 -
Connector rebuild kit Bally KISS/SPACE INV AS-2518-49
46 piece kit to overhaul the troublesome J1, J2, and J3 connectors.
In Stock$11.99 -
Bumper body - dead (B-10431)
Non-popping or dead bumper body used on many electromechanical games
In Stock$4.49 -
LED flicker eliminator kit Bally aux lamp board AS-4518-52
LED flicker eliminator kit Bally aux lamp board AS-2518-52
Out Of Stock$39.99 -
ULTIMATE MPU Board & TEST Card COMBO
SAVE $10.00 when you order both the ULTIMATE MPU and ULTIMATE TEST...
Out Of Stock$234.99 -
SPACE INVADERS (Bally) Bumper cap "50"
A-3852-2 "50" cap with black ring. 4 used on Bally SPACE INVADERS.
Out Of Stock$8.99 -
Coin door trim - Bally early 4 pc. frame
4 piece set of stainless steel door side trim for late electromechanical and solid state Bally games.
In Stock$49.99 -
HV shield solenoid driver Bally
Clear plastic plexiglass High Voltage safety shield for Bally solenoid driver board
In Stock$9.99 -
Bally sound board refurb
Bally AS-2518-51 sound board - refurbished. VIKING.
For Reference -
Coil - solenoid
Bally / Midway coil. Replaced by AO-26-1200
For Reference -
Flipper pushbutton white
Flipper pushbutton white B-16680 4B-200 03-40013N
In Stock$2.99 -
AC Power Cord - 10' AC - stripped end
10' long 3 wire grounded AC power cord with stripped ends.
In Stock$10.99 -
SPACE INVADERS (Bally) Plastic set
New playfield plastic set for the Bally SPACE INVADERS pinball.
In Stock$189.99 -
SPACE INVADERS (Bally) LED lamp kit
This is the 115 piece LED Lamp complete conversion kit for the Bally SPACE...
In Stock$159.99 -
Leaf switch - flipper EOS
Leaf switch - flipper EOS end of stroke
In Stock$9.99 -
Leaf switch Bally pop bumper
Leaf switch Bally pop bumper
In Stock$10.99 -
Capacitor .047M 50V +/-20 axial
.047uf Axial capacitor
In Stock$0.19 -
Hood - shooter lane bracket
Bally shooter lane arch bracket is made from pre-polished stainless steel...
In Stock$8.99 -
Switch - Single pushbutton service
Single normally open momentary pushbutton service switch.
In Stock$1.79 -
Flipper shoe 2 inch with 2-3/8 inch shaft
Flipper shoe 2 inch with 2-3/8 inch shaft assembly
In Stock$15.99 -
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
In Stock$19.99 -
Prop arm Bally early 22 inch
Playfield prop up rod for early Bally pinball machines. Reference:...
In Stock$13.99 -
anyPin NVRAM Battery Eliminator
NVRAM replacement for 6116, 6264 RAM ICs
In Stock$39.99 -
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Pin-Buddy™ Game Saver Cantraption™ 45° RED
In Stock$19.99 -
Capacitor 0.01 uF 500 v disc
Capacitor 0.01 uF 500 v disc
In Stock$0.49 -
SPACE INVADERS (Bally) Bumper cap set
Black star point perimeter with silver "Space Invaders" top imprint pop bu...
Out Of Stock$39.99 -
Potentiometer 10 Kohm linear PCB mount
Potentiometer 10 Kohm linear PCB mount
In Stock$3.99 -
Flipper plate assembly Bally
Flipper plate assembly Bally - reversible
For Reference -
Glass playfield 27.5 x 43 x3/16 BLY wide
Wide body early Bally solid state playfield tempered glass measures 27-1/2...
In Stock$129.99 -
Switch - spinner Bally solid state
Spinner switch assembly for early Bally solid state pinball machines.
In Stock$7.99 -
Diode (TO-3 package)
This is the metal TO-3 case diode used on Bally KISS and SPACE INVADERS po...
In Stock$15.99 -
Heat Sink Compound - 30 gram syringe
Heat Sink Compound - 30 gram syringe
In Stock$9.99 -
Coin door hinge - Bally
1970's and 80's vintage coin door hinge for Bally pinball machines.
For Reference -
Cap screw 10-32 x 1-1/4 inch socket head
Hex socket head cap screw has 10-32 partial thread and length of 1-1/4 inches.
In Stock$0.39 -
Cashbox - Bally Midway metal with handle
Cashbox - Bally Midway metal with handle
In Stock$49.99 -
SPACE INVADERS (Bally) Rubber Ring Kit
43 piece white rubber ring set for Bally SPACE INVADERS pinball includes white O-rings.
In Stock$21.99 -
Tilt bob wire Bally 3-1/2 inch
Tilt bob wire Bally 3-1/2 inch
In Stock$0.89 -
Nut 3/8 - 16 hex 9/16 across flats x 21/64 inch high
Standard 3/8 - 16 steel zinc finished hexnut. 9/16" across flats X 21/64 inch tall
In Stock$0.39 -
Flipper shoe & shaft assembly 2 inch shaft
Flipper shoe & shaft assembly 2 inch shaft
For Reference -
SPACE INVADERS (Bally) Score Cards
Playfield apron score / instruction cards for Bally SPACE INVADERS pinbal...
For Reference -
Coin window and plate bracket - Bally
Price plate retainer frame for Bally pinball machine coin entry door casti...
In Stock$4.49 -
Pin-Buddy™ Game Saver Cantraption™ 45° YELLO
Pin-Buddy™ Game Saver Cantraption™ 45° YELLOW
Out Of Stock$19.99 -
SPACE INVADERS (Bally) Drop target set-4
4 piece set of black drop targets for Bally SPACE INVADERS has 3 pieces of...
In Stock$23.99 -
Capacitor kit - Solenoid Driver/Voltage regulator A3 Bally
Capacitor kit - Solenoid Driver/Voltage regulator A3 Bally
Out Of Stock$18.99