Williams WHIRLWIND Parts
The following parts are known to work in Williams WHIRLWIND.
-
WHIRLWIND (Williams) Interconnect board
Williams WHIRLWIND pinball machine master interconnect board assembly...
In Stock$189.99 -
Plunger 2-1/8 inch
Plunger 2-1/8 inch. Reference: 02-3407-2 Use A-8050-1
In Stock$4.99 -
Armature with drop target reset plate
Plunger and reset plate used on many Bally/Williams pinball machine drop t...
In Stock$23.99 -
Outhole kicker assembly Williams
Outhole kicker assembly Williams
Out Of Stock$83.99 -
Capacitor 150 uF 160v axial
Capacitor 150 uF 160v axial
In Stock$0.79 -
Armature plate assembly
Armature plate assembly
In Stock$10.99 -
Coil bracket with 4 spring hooks & notches
Coil bracket with 4 spring retainer tabs and 3 notches.
In Stock$4.99 -
Coin return flap
Coin return flap
In Stock$3.49 -
Lamp socket - wedge base with clips
Snap-in lamp socket holds wedge based miniature lamps
In Stock$1.49 -
Transistor NPN 120V 8A TO-220 5164-12154-00 XO-1143
NPN complementary silicon plastic power transistor in a TO-220AB case. XO-1143
In Stock$2.49 -
Lift crank arm
Lift crank arm assembly used in Bally/Williams ramp lifting mechanisms.
In Stock$15.99 -
Resistor - 5.6 ohm 5 watt 10%
Resistor 5.6 ohm 5 watt 10%
In Stock$1.29