Williams FISH TALES Parts
The following parts are known to work in Williams FISH TALES.
-
Yoke metal - pop bumper substitute 01-5492
Yoke metal - pop bumper substitute 01-5492
For Reference -
Wireform - tilt plumb bob threaded
Plumb bob tilt wire is used on many Bally Williams and other machines.
In Stock$1.49 -
Socket IC PLCC 84 pin
Socket IC PLCC 84 pin
In Stock$5.49 -
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Pin-Buddy™ Game Saver Cantraption™ 45° RED
In Stock$19.99 -
Washer 0.125 x 0.281 x .032 inch
Washer - zinc plated- 0.125 x .281 x .032 inch rivet back
In Stock$0.59 -
Sheet Metal Screw #6 x 1" pl-hwh
The most common sheet metal / wood screw in late model pinball machines. T...
In Stock$0.19 -
Tubing-clear 1-1/2"
Tubing - clear 1-1/2" Reference: 23-6716-2
In Stock$0.49 -
E-clip for 5/16" shaft
E-clip or e-ring commonly used on many mechanisms. 5/16" measured at the o...
In Stock$0.39 -
Pop bumper skirt - clear
Pop bumper skirt - clear
In Stock$1.49 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
Washer 0.265 inch x 0.500 inch x 0.032 inch
Flat washer 0.265 inch x 0.500 inch x 0.032 inch
In Stock$0.19 -
Nut 8-32 keps
Nut 8-32 keps
In Stock$0.29