Bally KISS (Bally) Parts
The following parts are known to work in Bally KISS (Bally).
-
Lock and cam - 7/8" combination
Standard 7/8" long chrome finish barrel lock with 3 digit adjustable combination
In Stock$23.99 -
Ball shooter rod - Bally pointed knob
Bally ball shooter rod with pointed knob
Out Of Stock$16.99 -
Pinball Event Tune-Up Kit
Pinball Event Tune-Up Kit
In Stock$22.50 -
Bally sound board Refurb
AS-2518-50 sound board - refurbished. Please specify game...
For Reference -
Connector .100 inch 28 position female
.100 inch 28 Position female molex housing.
For Reference -
Flipper pushbutton red
Flipper cabinet opaque red pushbutton used on many early solid state and EM games.
In Stock$3.49 -
C-clip for 3/8 in shaft - ball shooter rod
C-Clip (C crimp fastener, retaining clip) for most ball shooter rods.
In Stock$0.29 -
Post 1 inch concentric fin red - short
1 inch tall red ribbed plastic playfield post with concentric rings desig...
In Stock$0.89 -
Guard - shooter lane Bally
Guard - shooter lane Bally
In Stock$6.99 -
Ball shooter T bushing Bally/Midway
Nylon T shaped bearing used on early Bally/Midway ball shooter assemblies.
In Stock$5.99 -
Coin drop plate Bally 25¢
Coin door drop plate for 60's, 70's and 80's Bally coin door entry casting...
In Stock$3.99 -
Diode - 100 volt 0.15a XO-261
Diode small signal switching 100V 0.3A 2-Pin DO-35
In Stock$0.39 -
Credit lamp lens Bally/Williams
Playfield apron credit lamp plastic lens
In Stock$1.99 -
Coil stop Bally EM
Coil stop for electromechanical stepping units has9/16" on center mounti...
In Stock$5.99 -
Pin-Buddy™ Game Saver Cantraption™ 180°
Pin-Buddy™ Game Saver Cantraption™ 180°
In Stock$19.99 -
Button - flipper housing red
Flipper cabinet opaque red pushbutton housing used on many early solid sta...
In Stock$3.49 -
Hole guard - switch slot 1-1/4 inch USE HG-SS125C
Hole guard - switch slot 1-1/4 inch
In Stock$21.99 -
Rectifier board Bally/Stern solderless
SOLDERLESS Rectifier board Bally/Stern AS-2518-18/49 TA-100 C-464
In Stock$104.99 -
Plunger & link assy - Slingshot kicker
Bally plunger and link used in slingshot kickers and ball kicker assyembly Sub A-3714-3.
For Reference -
Connector rebuild kit Bally KISS/SPACE INV AS-2518-49
46 piece kit to overhaul the troublesome J1, J2, and J3 connectors.
In Stock$11.99 -
Spinning target Bally white
Spinning target Bally white
In Stock$25.99 -
ULTIMATE MPU Board & TEST Card COMBO
SAVE $10.00 when you order both the ULTIMATE MPU and ULTIMATE TEST...
Out Of Stock$234.99 -
Coin door trim - Bally early 4 pc. frame
4 piece set of stainless steel door side trim for late electromechanical and solid state Bally games.
In Stock$49.99 -
HV shield solenoid driver Bally
Clear plastic plexiglass High Voltage safety shield for Bally solenoid driver board
In Stock$9.99 -
KISS (Bally) LED Kit
KISS (Bally) LED Kit
In Stock$139.99 -
LED flicker eliminator kit Bally aux lamp board AS-2518-43
LED flicker eliminator kit Bally aux lamp board AS-2518-43
In Stock$26.99 -
Bracket - coil retainer
Coil retainer bracket for Bally playfield mechanisms
In Stock$5.99 -
KISS (Bally) pop bumper cap set (4) R/K
4 piece set of Bally KISS pop bumper caps.
In Stock$59.99 -
Aux lamp driver A9
Auxiliary lamp driver board A9 used in early Bally chaser light circuits. A084-91614-A000
In Stock$89.99 -
Coil - solenoid
Bally / Midway coil. Replaced by AO-26-1200
For Reference -
AC Power Cord - 10' AC - stripped end
10' long 3 wire grounded AC power cord with stripped ends.
In Stock$10.99 -
Bally 1979-1 Parts Catalog AS IS
Bally 1979-1 Parts Catalog Electronic Pinball Games. Original
For Reference -
Leaf switch - flipper EOS
Leaf switch - flipper EOS end of stroke
In Stock$9.99 -
KISS (Bally) mirrored backglass
KISS (Bally) mirrored backglass
Out Of Stock$289.99 -
Capacitor .047M 50V +/-20 axial
.047uf Axial capacitor
In Stock$0.19 -
Hood - shooter lane bracket
Bally shooter lane arch bracket is made from pre-polished stainless steel...
In Stock$8.99 -
Switch - Single pushbutton service
Single normally open momentary pushbutton service switch.
In Stock$1.79 -
KISS (Bally) Plastic set
KISS (Bally) pinball machine playfield plastic set
Out Of Stock$189.99 -
Flipper crank Bally long stud right
Flipper crank Bally long stud right
In Stock$15.99 -
Flipper assembly Bally early left
Flipper assembly Bally early left
In Stock$94.99 -
Coil Midway #A390-00027-0000
Bally / Midway relay coil with diode A390-00027-0000
In Stock$18.99 -
Switch - drop target Bally SS side mount
Switch - drop target Bally Solid State side mount
In Stock$16.99 -
Invisiglass playfield 21 x 43 x 3/16 inch standard
Standard pinball playfield Invisiglass.
In Stock$259.99 -
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
Pin-Buddy™ Game Saver Cantraption™ 45° BLUE
In Stock$19.99 -
Backglass lock rail Bally
Bally backglass lock rail for early Bally backboxes.
In Stock$37.99 -
Flipper crank Bally long stud left
Flipper crank Bally long stud left
In Stock$15.99 -
Prop arm Bally early 22 inch
Playfield prop up rod for early Bally pinball machines. Reference:...
In Stock$13.99 -
anyPin NVRAM Battery Eliminator
NVRAM replacement for 6116, 6264 RAM ICs
In Stock$39.99 -
Pin-Buddy™ Game Saver Cantraption™ 45° RED
Pin-Buddy™ Game Saver Cantraption™ 45° RED
In Stock$19.99 -
Coin drop filler plate - Bally
Stainless steel blocking plate used on early Bally coin entry casting asse...
In Stock$3.99 -
Capacitor 0.01 uF 500 v disc
Capacitor 0.01 uF 500 v disc
In Stock$0.49 -
Potentiometer 10 Kohm linear PCB mount
Potentiometer 10 Kohm linear PCB mount
In Stock$3.99 -
Flipper plate assembly Bally
Flipper plate assembly Bally - reversible
For Reference -
Flipper assembly Bally early right
Flipper assembly Bally early right
In Stock$94.99 -
KISS (Bally) Rubber Ring Kit WHITE
27 piece white rubber ring kit for the Bally KISS pinball machine includes...
In Stock$17.99 -
Leaf switch Bally button rollover
Leaf switch Bally button rollover
For Reference -
Diode (TO-3 package)
This is the metal TO-3 case diode used on Bally KISS and SPACE INVADERS po...
In Stock$15.99 -
Heat Sink Compound - 30 gram syringe
Heat Sink Compound - 30 gram syringe
In Stock$9.99 -
Coin door hinge - Bally
1970's and 80's vintage coin door hinge for Bally pinball machines.
For Reference -
Cashbox - Bally Midway metal with handle
Cashbox - Bally Midway metal with handle
In Stock$49.99