Bally WHO DUNNIT Parts
The following parts are known to work in Bally WHO DUNNIT.
-
Lit Frames 90s Williams-Bally
Lit Frames 90s Williams-Bally
In Stock$219.99 -
Post - 1-1/4 inch narrow black
Post - 1-1/4 inch narrow black
In Stock$1.09 -
DRACULA (Williams) Post lift assembly
Post lift assembly part #A-16248 is used in: Williams BRAM STOKER'S DRA...
For Reference -
Bushing - metal roller moving target
Bushing - metal roller moving target
In Stock$4.49 -
Resistor 120 ohm 5w 5% USE R5W120
Resistor 120 ohm 5w 5%. Replaced by R5W120
For Reference -
Torx® wrench key T-25 tamper resistant
Torx® wrench key T-25 tamper resistant
In Stock$5.99 -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. measured at the o...
For Reference -
WHO DUNNIT (Bally) Plastic
plfd plastic-who dunit
For Reference -
E-clip for 7/16 in. shaft
E-clip or e-ring commonly used on many mechanisms. 7/16 in. Replaced by 20-8712-43
For Reference -
Pop bumper body Williams 36mm red transparent
Pop bumper body Williams 36mm red transparent
In Stock$2.99 -
Dot Matrix 128 x 32 LED display
New 128 x 32 LED Dot Matrix Display module for pinball machines
Out Of Stock$329.99 -
Flipper crank bolt with flat 90 degree notch washer modified
Flipper crank bolt with flat 90 degree notch washer modified for use on flipper pawl.
For Reference