Bally WHO DUNNIT Parts
The following parts are known to work in Bally WHO DUNNIT.
-
Washer .172 x .437 x .062 inch brass
Washer .172 x .437 x .062 inch brass
In Stock$0.49 -
Washer .361" x .500" x .059"
Flat washer .361" x .500" x .059" thick.
In Stock$0.39 -
Flat washer .2031 x .625 x .105 inches modified
Washer - modified crank washer
In Stock$0.39 -
Flipper crank bolt with flat 90 degree notch washer modified
Flipper crank bolt with flat 90 degree notch washer modified for use on flipper pawl.
For Reference -
Washer 0.70" x 1.19" x 0.09"
Flat washer 0.70" x 1.19" x 0.09" thick.
In Stock$0.29 -
Lock washer #6 split
Lock washer #6 split
In Stock$0.19 -
Lock washer #8 split
lock washer #8 split
In Stock$0.19 -
Lock washer #10 steel reg split L/W zinc
#10 steel split lock washer. Zinc plated.
In Stock$0.19 -
Sheet Metal Screw #8 x 1/2 inch ind pl-hwh
One of the most commonly used screws in Williams/Bally pinball machines.
In Stock$0.29 -
Resistor .22 ohm 1 watt 5%
Resistor .22 ohm 1watt 5% tolerance
In Stock$0.39 -
Resistor .12 ohm 10w 5%
Cement resistor 0.12 Ohm 10W 5% Tolerance Reference: 5012-12632-00
In Stock$2.99 -
Resistor 1.8k ohm 5w 5%
Resistor 1.8k ohm 5 watt 5%
For Reference