Sega X FILES Parts
The following parts are known to work in Sega X FILES.
-
Ball 1-1/16 inch standard pinball
Standard carbon steel 1-1/16 inch diameter, 80 gram case hardened pinball
In Stock$2.99 -
Dot matrix display for pinball machines
Dot matrix display (DMD) for pinball machines
In Stock$499.99 -
Ball 1-1/16 in, Standard Pinball, 5-Pack Tube
Standard carbon steel 1-1/16" diameter, 80 gram pinball
In Stock$9.99 -
Spring - barrel ball shooter outer
Barrel shaped, bright finish shooter spring used on many brand...
In Stock$0.69 -
Leg bolt 3/8-16 x 2-1/2 inch acorn head 5/8 inch
Leg bolt 3/8-16 thread with 5/8 inch acorn head and 2-1/2 inch length.
In Stock$1.04 -
Glass playfield 21 x 43 x 3/16 inch standard
Standard pinball playfield tempered glass.
In Stock$99.99 -
Wrench Hex Tool backbox latch 5/16"
Backbox latch hex key wrench tool for Data East / Sega / Stern
In Stock$7.99 -
Flipper rebuild kit - Sega / Stern
Flipper rebuild kits for late model Sega & post 2000 Stern pinball machines includes...
In Stock$47.99 -
Battery holder for CPU Boards
This is the battery holder used on late model Stern (1998 and newer) and S...
In Stock$4.49 -
anyPin NVRAM Battery Eliminator Universal
Universal NVRAM replacement for 5101, 6116, 6264 RAM ICs
Out Of Stock$79.99 -
Spring - barrel compression shooter black
Spring - barrel compression shooter black
In Stock$0.69 -
Glass playfield 21 x 43 x 3/16 inch HD anti-reflection
HD Anti-reflection Glass playfield 21 x 43 x 3/16 inch
In Stock$259.99 -
Coil - solenoid flipper w/diode 090-5032-0T
Flipper coil with diode for solid state flipper systems.
In Stock$22.99 -
Spring - barrel compression shooter brass
Spring - barrel compression shooter brass
In Stock$0.89 -
Pin-Buddy™ combo kit
Pin-Buddy™ combo kit
In Stock$49.99 -
Spring - barrel compression 3/4" shooter
Shorter barrel spring for ball shooter assembly on all Data East, Sega, an...
In Stock$1.49 -
Power Driver Board - Stern/Sega REV G
I/O Power Driver Board Revision "G" used on Sega/Stern White Star System.
Out Of Stock$549.99 -
Pin-Buddy™ Game Saver Cantraption™ 45°
Pin-Buddy™ Game Saver Cantraption&tm 45°
In Stock$19.99 -
Coil - solenoid flipper Stern no diode
Coil - solenoid flipper Stern no diode
In Stock$25.99 -
CPU/Sound Board component update kit
CPU/Sound Board component update kit
In Stock$18.99 -
Glass corner protectors - Set of 2
Glass corner protectors - Set of 2
In Stock$9.99 -
Coil - solenoid with diode DE/Sega/Stern
Data East/Sega/Stern 26-1200 solenoid coil with diode
In Stock$19.99 -
Display power supply board Whitestar/SAM
Display power supply board Whitestar/SAM
In Stock$69.99 -
Transistor - N Mosfet 100v 22a TO-220 110-0106-00 USE IRL540
MOSFET transistor driver N channel 100V - 0.07 ohm - 22A
For Reference -
Transistor N channel 100v 20a Mosfet 110-0088-00 TO-220
Transistor N channel 100v 20a Mosfet TO-220 110-0088-00
In Stock$2.99 -
IC - 24 pin DIP Static RAM 6116LP XO-928
Integrated Circuit 2K by 8 CMOS static 24 pin RAM chip. Replaces 5340-09878-00
Out Of Stock$8.99 -
Pinball Event Tune-Up Kit
Pinball Event Tune-Up Kit
In Stock$22.50 -
Coil - solenoid with diode DE/Sega/Stern
Data East/Sega/Stern solenoid coil 24-940 with diode on top (OT)
In Stock$19.99 -
Magnet core - adjustable - flat top.
Threaded core plug adjustable - flat top.
In Stock$12.99 -
Switch - leaf single stack Stern
Cabinet Leaf Single Stack Switch with gold contacts. This switch is used...
In Stock$15.99 -
Coil - magnet DE / Sega / Stern USE 20-9247
USE 20-9247
For Reference -
Coil stop
1/4 inch core height coil stop with 3/8 inch on center mounting holes.
In Stock$9.99 -
Pin-Buddy™ Game Saver Cantraption™ 180°
Pin-Buddy™ Game Saver Cantraption™ 180°
In Stock$19.99 -
Hole guard - switch slot 1-1/4 inch USE HG-SS125C
Hole guard - switch slot 1-1/4 inch
Out Of Stock$21.99 -
Ribbon Cable - 14 pin 6 inch DMD to Control-- Z
Ribbon cable 14 pin 6-1/2 inch long with reversed connectors used on Sega & Stern pinball machines
In Stock$7.99 -
IC - 28 pin DIP NVRAM FM1608-120
IC - 28 pin DIP NVRAM FM1608-120
In Stock$19.99